com.perfboarddesigner/mcp

Est-ce que com.perfboarddesigner/mcp est sûr ?

Au dernier audit MCP Hub, le serveur MCP « com.perfboarddesigner/mcp » est classé « Non encore testé ». Référencé dans l'annuaire. Seul le pentest comportemental fait foi, et il n'a pas encore été exécuté sur ce serveur. Le verdict est réévalué en continu ; consultez la fiche pour l'état à jour.

Méthode : MCP Hub analyse la description de chaque outil (couche 1) et, pour le verdict fort, exécute le serveur dans une micro-VM isolée avec leurres et réseau bloqué (couche 2). On publie des noms et des compteurs, jamais le contenu brut renvoyé par un outil.

Les 12 outils

• edit_project≈ 2832 tokens

  Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `path` of holes made into one wire per leg), update_wire, remove_wires, set_board, add_cuts / remove_cuts (stripboard), set_pad (a note on a hole). If any op can't be done, none are. Returns what changed, where the pins of added or moved parts landed, and the board checked as validate_project does (with any expectNets remembered for it); when it has no errors, also its nets. get_project returns the whole file. The goal is a board that's right, looks neat and is easy to solder, not just the shortest wires: parts in tidy rows near what they connect to, connectors at the edges, straight wires with few corners and no crossing you can avoid, none over a part's body. Before giving the user the link, look at it (render_board with format "png"), rework what's messy and check it again.

  Paramètres, retour & exemple (4)

  Paramètres

  • ops · array · requis
  • project · ? · optionnel
    A whole project file to start from instead of a projectId: it's kept here and the reply gives its new projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.
  • expectNets · array · optionnel
    The nets the board should make: each a list of pins written REF.pin, e.g. [["U1.8", "U1.4", "R1.1", "J1.1"], ["U1.2", "U1.6", "C1.+"]]. A pin can also be named by its label ("U1.VCC", "D1.K") or as get_nets writes it ("U1.8 VCC"). List every net of two or more pins: a pin in none of them should connect to nothing. With a projectId it's remembered for that project, so later checks use it too; [] forgets it.

  Exemple d'appel

  {"name": "edit_project", "arguments": {"ops": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• get_nets≈ 328 tokens

  Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, "R1.1" otherwise) and the wires on it (indexes into wires). Also pins connected to nothing, wires that connect no pins, junctions (holes where three or more things are joined) and crossings (where a wire goes over another wire or over a hole without joining it). Wires are insulated jumpers: a wire joins only the holes at its two ends, so crossings are information, not connections or shorts. On a stripboard the strips connect too.

  Paramètres, retour & exemple (2)

  Paramètres

  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.

  Exemple d'appel

  {"name": "get_nets", "arguments": {"project": "texte", "projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• get_part≈ 177 tokens

  Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit, holes its body covers, and an example entry. Ask for every part you use in one call with `ids`.

  Paramètres, retour & exemple (2)

  Paramètres

  • id · string · optionnel
    One part id, instead of `ids`.
  • ids · array · optionnel
    Part ids from list_parts, e.g. ["resistor", "ne555", "header-pins"].

  Exemple d'appel

  {"name": "get_part", "arguments": {"id": "texte", "ids": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• get_pin_positions≈ 292 tokens

  Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. Use it to route wires to the right holes. The project file doesn't store these: they follow from each part's anchor, rotation and footprint.

  Paramètres, retour & exemple (3)

  Paramètres

  • refs · array · optionnel
    Only these parts, e.g. ["U1", "R2"]. All parts when omitted.
  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.

  Exemple d'appel

  {"name": "get_pin_positions", "arguments": {"refs": [], "project": "texte", "projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• get_project≈ 106 tokens

  The whole project file of a project kept here, as the editor would save it (version 3, or 4 once a wire bends), one entry per line.

  Paramètres, retour & exemple (1)

  Paramètres

  • projectId · string · requis

  Exemple d'appel

  {"name": "get_project", "arguments": {"projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• list_parts≈ 254 tokens

  Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what there is. With a query: the parts whose id, name, category or keywords contain all its words, or the closest ones when none do. Each part's `id` is its definitionId in the project file; use get_part for its pins and how to place it.

  Paramètres, retour & exemple (2)

  Paramètres

  • kind · string · optionnel · standard-component | advanced-component | ic
    standard-component: two-lead parts placed between two holes. advanced-component: fixed-footprint parts. ic: dual-row chips and modules.
  • query · string · optionnel
    Words to match, e.g. "capacitor", "555", "header", "relay". Leave it out to list every part.

  Exemple d'appel

  {"name": "list_parts", "arguments": {"kind": "standard-component", "query": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• make_share_link≈ 778 tokens

  Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user. Also returns `image`, the address of an SVG picture of the board (as the editor draws it), for showing it where images from links display, e.g. in Markdown (not in Claude or ChatGPT, which don't load them: show_board shows the board there). With store, the project is also stored on the Perfboard Designer server under a short id, and `stored` gives a short link to it, its file and its pictures (SVG and PNG): give the user both links. The project is validated first (against expectNets too, given or remembered for its projectId); a project with errors gets the list of problems instead of a link, unless allowErrors is set.

  Paramètres, retour & exemple (8)

  Paramètres

  • name · string · optionnel
    The project's name in the editor, e.g. "555 LED blinker". Defaults to the name it was given in new_project or came with from read_share_link.
  • store · boolean · optionnel
    Also store the project at https://projects.perfboarddesigner.com, for a short link. A stored project never changes (store again for a new id) and is deleted after a year unopened.
  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • storeAs · string · optionnel
    The id you'd like it stored under, e.g. "led-blinker" (made lowercase letters, digits and dashes); if another board has it, a few characters of this board's hash are added. Implies store. Defaults to the project's name.
  • editorUrl · string · optionnel
    The editor's address. Defaults to https://perfboarddesigner.com/app/ (set PERFBOARD_EDITOR_URL in the server's environment to change it); use e.g. http://localhost:3000/app/ for a local copy.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.
  • expectNets · array · optionnel
    The nets the board should make: each a list of pins written REF.pin, e.g. [["U1.8", "U1.4", "R1.1", "J1.1"], ["U1.2", "U1.6", "C1.+"]]. A pin can also be named by its label ("U1.VCC", "D1.K") or as get_nets writes it ("U1.8 VCC"). List every net of two or more pins: a pin in none of them should connect to nothing. With a projectId it's remembered for that project, so later checks use it too; [] forgets it.
  • allowErrors · boolean · optionnel
    Make the link even if validation finds errors.

  Exemple d'appel

  {"name": "make_share_link", "arguments": {"name": "texte", "store": true, "project": "texte", "storeAs": "texte", "editorUrl": "texte", "projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• new_project≈ 377 tokens

  Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and the project file. Then add parts and wires with edit_project, and pass the projectId to every other tool instead of the whole file.

  Paramètres, retour & exemple (6)

  Paramètres

  • cols · integer · optionnel
    Holes across. 30 when left out.
  • name · string · optionnel
    The project's name, used by make_share_link.
  • rows · integer · optionnel
    Holes down. 20 when left out.
  • type · string · optionnel · perfboard | stripboard
    perfboard (default): a separate pad per hole. stripboard: copper strips joining every hole along each row (or column).
  • strips · string · optionnel · horizontal | vertical
    A stripboard's strips: along rows (horizontal, default) or columns.
  • example · string · optionnel · 555-led-blinker | 555-led-blinker-stripboard
    Start from an example instead of a blank board: "555-led-blinker" (555 LED blinker (perfboard)), "555-led-blinker-stripboard" (555 LED blinker (stripboard)).

  Exemple d'appel

  {"name": "new_project", "arguments": {"cols": 1, "name": "texte", "rows": 1, "type": "perfboard", "strips": "horizontal", "example": "555-led-blinker"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• read_share_link≈ 182 tokens

  Reads the project out of a Perfboard Designer share link (any of its forms: z=, json= or src=, which is downloaded; a stored project's short link too), so you can look at or change a board the user shared. Returns the project as a project file (version 3, or 4 when a wire bends), kept here under the projectId it returns: change it with edit_project.

  Paramètres, retour & exemple (1)

  Paramètres

  • link · string · requis
    The whole link, or just the part after #.

  Exemple d'appel

  {"name": "read_share_link", "arguments": {"link": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• render_board≈ 517 tokens

  Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, wire ends, the holes a wire runs over without joining them, strip cuts and holes with notes. Below it, which part each key is and every wire with its ends and net. Use it to see where there's free space and how wires run before placing parts or routing more. With format "png", a picture of the board as the editor draws it instead, to see how it looks: parts' bodies and where they reach, labels, wire colours. To show the user the board, use show_board.

  Paramètres, retour & exemple (4)

  Paramètres

  • area · object · optionnel
    Only this part of the board: two opposite corner holes. The whole board when left out.
  • format · string · optionnel · text | png
    "text" (default): the board as text. "png": a picture of it, 50 px per hole, scaled down to fit 1000 px.
  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.

  Exemple d'appel

  {"name": "render_board", "arguments": {"area": {}, "format": "text", "project": "texte", "projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• show_board≈ 318 tokens

  Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that show MCP Apps (e.g. Claude, ChatGPT); elsewhere the user sees nothing, so give them make_share_link's link too. The picture goes to the user, not to you: to look at the board yourself, use render_board.

  Paramètres, retour & exemple (3)

  Paramètres

  • name · string · optionnel
    The project's name, shown under the picture and in the editor. Defaults to the name it was given in new_project or came with from read_share_link.
  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.

  Exemple d'appel

  {"name": "show_board", "arguments": {"name": "texte", "project": "texte", "projectId": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• validate_project≈ 540 tokens

  Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads in one hole, overlapping parts, wires that connect nothing (a loose end, or no pins on their net), duplicate wires, a two-lead part with both leads on one net (shorted out), a wire passing over a pin or lead without ending there (so not joined to it), IC pins and two-lead parts' leads connected to nothing, supply rails shorted together, and on a stripboard, pins shorted by a strip or sitting in a cut hole. With expectNets, every connection missing from the board or extra on it is an error. Wires crossing each other are fine (insulated jumpers) and only listed in notes. Fix all errors before making a link. A project sent whole is kept here: the reply's projectId stands for it in every other tool.

  Paramètres, retour & exemple (3)

  Paramètres

  • project · ? · optionnel
    The whole project file: a version 3 or 4 project object, or its JSON text (see the perfboard://docs/project-file resource). Give this or projectId.
  • projectId · string · optionnel
    The id of a project kept here (from new_project, validate_project, edit_project or read_share_link), instead of sending the whole project.
  • expectNets · array · optionnel
    The nets the board should make: each a list of pins written REF.pin, e.g. [["U1.8", "U1.4", "R1.1", "J1.1"], ["U1.2", "U1.6", "C1.+"]]. A pin can also be named by its label ("U1.VCC", "D1.K") or as get_nets writes it ("U1.8 VCC"). List every net of two or more pins: a pin in none of them should connect to nothing. With a projectId it's remembered for that project, so later checks use it too; [] forgets it.

  Exemple d'appel

  {"name": "validate_project", "arguments": {"project": "texte", "projectId": "texte", "expectNets": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

C'est votre serveur ?

Revendiquez-le sur l'espace créateur (preuve GitHub, domaine ou npm) pour afficher le badge « propriétaire vérifié » et lancer un pentest comportemental à la demande afin d'obtenir le badge « Vérifié ».

Créer un compte / revendiquer →

Source

https://mcp.perfboarddesigner.com/mcp