social.walletlink/wallet-identity

Est-ce que social.walletlink/wallet-identity est sûr ?

Au dernier audit MCP Hub, le serveur MCP « social.walletlink/wallet-identity » est classé « Non encore testé ». Référencé dans l'annuaire. Seul le pentest comportemental fait foi, et il n'a pas encore été exécuté sur ce serveur. Le verdict est réévalué en continu ; consultez la fiche pour l'état à jour.

Méthode : MCP Hub analyse la description de chaque outil (couche 1) et, pour le verdict fort, exécute le serveur dans une micro-VM isolée avec leurres et réseau bloqué (couche 2). On publie des noms et des compteurs, jamais le contenu brut renvoyé par un outil.

Les 8 outils

• walletlink_account_balance≈ 231 tokens

  How many match credits the configured key has left, and how much of the request allowance it has used. COST: free on both meters. Call it before a reverse lookup, which can spend up to 100 credits in one go. matches_available is the meter that stops a metered call: at zero, the resolve and reverse tools refuse, while this tool and the coverage tool keep answering, so a drained key can always read its own meter. rate_limit_units_used is a separate count of requests and is not a credit figure. unmetered is true on an account that is never debited. Its matches_available is null because it has no balance to report, not because the balance is zero.

  Paramètres, retour & exemple (0)

  Exemple d'appel

  {"name": "walletlink_account_balance", "arguments": {}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_estimate_list≈ 399 tokens

  A dry run over a list of addresses: how many are in the index, how many were checked and found bare, how many have never been seen, and the band a resolve would bill inside. Counts only, no identities. Use it to decide whether a list is worth resolving, and which tool to spend on. COST: free on the match meter, always, even at zero balance. It weighs the rate window exactly like resolving the same list (one request-unit per address), so it previews a batch at the batch’s own pace. Minimum 10 distinct addresses, because the counts are aggregates by design; the ceiling is your plan’s batch ceiling. Reading the band: low is exact for resolving this list now (the addresses already holding an X handle or a Farcaster account). high adds never-checked addresses at the measured overall rate; a background job resolves those against live sources, a plain resolve does not. Match rates differ several-fold by chain; the coverage tool and /v1/stats carry the measured per-chain table.

  Paramètres, retour & exemple (1)

  Paramètres

  • addresses · array · requis
    Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter.

  Exemple d'appel

  {"name": "walletlink_estimate_list", "arguments": {"addresses": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_index_coverage≈ 232 tokens

  How much of the index carries each identity type. Use it to judge whether a lookup is worth making before making it. COST: free on both meters. It resolves no wallet and consumes no rate limit. A key whose balance is zero can still read the free endpoints; the balance and coverage reads keep answering at zero, and only a call that could bill refuses with NO_CREDITS. addresses_with_an_identity over addresses_checked is the coverage rate. The second number is larger because it counts addresses we have looked at and found bare. The counts are refreshed daily rather than counted live; as_of says when they were taken, and asking twice in a day returns the same numbers.

  Paramètres, retour & exemple (0)

  Exemple d'appel

  {"name": "walletlink_index_coverage", "arguments": {}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_job_status≈ 311 tokens

  Progress and results for a job submitted with walletlink_submit_job. While the job runs it reports processed counts; on completion it reports the resolved records and what was billed. COST: free on both meters, so a drained key can still collect results it already paid for. A field that is absent was not measured. Absent is not false: a missing reachability means the handle was not checked, never that nobody is behind it. Only jobs submitted by this account are visible; any other id answers not found.

  Paramètres, retour & exemple (2)

  Paramètres

  • job_id · string · requis
    The job id returned by walletlink_submit_job.
  • offset · integer · optionnel
    Result row to start from, for a completed job. Pass the next_offset from a previous call to continue. Omit for the first page.

  Exemple d'appel

  {"name": "walletlink_job_status", "arguments": {"job_id": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_resolve_wallets≈ 528 tokens

  Resolve one or more Ethereum addresses to the social identities attached to them: X handle, Farcaster account, ENS name, Lens profile, GitHub account. COST: one match credit per address that resolves to an X handle or a Farcaster account. An address that resolves to nothing is free, and so is one carrying only an ENS name, a Lens profile or a GitHub account. Up to 50 addresses per call on the default plan; a live Scale pack raises the ceiling to 200 and Index to 1000, and the API refuses over YOUR ceiling with BATCH_SIZE_EXCEEDED naming it. A batch call spends one request-unit per address of the per-minute window, and a full batch fills most of a minute on every plan: the default plan gives 60 units per minute and 50-address batches, and a live Scale or Index pack raises both. Pace multi-batch runs a minute apart and read the reset time from the quota. Each identity reports whether the address owner attested it rather than it being correlated by a third party, and each X handle reports whether it still reaches anyone: a handle can be attested and suspended, or freed and since taken by a stranger. Send every address you need in one call. Duplicates are removed before you are charged, but each copy still costs throughput. A retried call bills again: duplicates are removed inside one call, never across calls, and a tool call cannot carry an idempotency key. Before resending a call that may have gone through, read the balance instead of guessing.

  Paramètres, retour & exemple (1)

  Paramètres

  • addresses · array · requis
    Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter.

  Exemple d'appel

  {"name": "walletlink_resolve_wallets", "arguments": {"addresses": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_submit_job≈ 451 tokens

  Submit a list of addresses as a background job. A job runs a deeper scan than the resolve tool: an address the index has not checked, or holds only stale answers for, is resolved against live sources, so a job can find identities the resolve tool reports as never seen. Use it for lists larger than one resolve call, or when misses are worth re-checking. COST: billed on matches exactly like resolving, when the job completes: one match credit per address that resolved to an X handle or a Farcaster account, misses free. One job may be active per account at a time; a second submission is refused until the first finishes, and the refusal names the active job id. A submission is capped at 10 times the match balance, so the worst case is bounded by what the account already holds. Submitting itself spends one request-unit of the rate window. The submission returns a job id. Poll walletlink_job_status for progress and, on completion, the results. A job that fails is never billed. Resubmitting the same list after a job completes runs the whole job again and bills its matches again.

  Paramètres, retour & exemple (1)

  Paramètres

  • addresses · array · requis
    Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter. The ceiling is the balance-derived cap, not a fixed number; a list over the cap is refused with the cap named.

  Exemple d'appel

  {"name": "walletlink_submit_job", "arguments": {"addresses": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_wallets_by_farcaster_username≈ 392 tokens

  Find the wallets in the index attested to a Farcaster account. Only wallets whose recorded sources are all attested come back, so a wallet whose Farcaster verification sits beside a correlated source is left out; resolving that address still shows it, labeled. Needs a key that belongs to an account: a key bought with USDC alone gets ACCOUNT_REQUIRED. COST: one match credit per wallet returned, and a page holds up to 100. A username nobody holds returns an empty list and is free. A retried call bills its returned wallets again. Pass the username whole, including any .eth suffix: an ENS name attached to a Farcaster account is a large share of the index, and stripping the suffix will find nothing. Results are ordered by follower count, highest first.

  Paramètres, retour & exemple (2)

  Paramètres

  • cursor · string · optionnel
    The next_cursor from a previous call, passed back unchanged. Omit for the first page.
  • username · string · requis
    A Farcaster username, such as dwr or vitalik.eth. 1 to 32 characters of letters, numbers, dots and hyphens, starting with a letter or a number.

  Exemple d'appel

  {"name": "walletlink_wallets_by_farcaster_username", "arguments": {"username": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• walletlink_wallets_by_x_handle≈ 396 tokens

  Find the wallets in the index attested to an X account. The reverse of resolving an address. Only wallets whose recorded sources are all attested come back, so a wallet whose attested link sits beside a correlated source is left out; resolving that address still shows it, labeled. Needs a key that belongs to an account: a key bought with USDC alone gets ACCOUNT_REQUIRED. COST: one match credit per wallet returned, and a page holds up to 100. A handle nobody holds returns an empty list and is free. The free allowance is 100 matches per 30 days, so a single widely held handle can spend all of it in one call. Check the balance first with walletlink_account_balance if that matters. A retried call bills its returned wallets again. Results are ordered by Farcaster follower count, highest first. When more_pages is true, pass next_cursor back to continue.

  Paramètres, retour & exemple (2)

  Paramètres

  • cursor · string · optionnel
    The next_cursor from a previous call, passed back unchanged. Omit for the first page.
  • handle · string · requis
    An X handle, 1 to 15 letters, numbers or underscores. A leading @ is accepted. Case does not matter.

  Exemple d'appel

  {"name": "walletlink_wallets_by_x_handle", "arguments": {"handle": "texte"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

C'est votre serveur ?

Revendiquez-le sur l'espace créateur (preuve GitHub, domaine ou npm) pour afficher le badge « propriétaire vérifié » et lancer un pentest comportemental à la demande afin d'obtenir le badge « Vérifié ».

Créer un compte / revendiquer →

Source

https://walletlink.social/api/mcp